Vertical Shaft Impact Crusher

Author:admin Hits:

What is the Vertical Shaft Impact Crusher? Vertical Shaft Impact Crusher is what properties of the crushing equipment?

Vertical Shaft Impact Crusher is a new product that absorbs advanced technologies at home and abroad. This Series equipment can crusher material which max feed size is less than 500mm, compression strength is not more than 320 Mpa (eg: granite, limestone, concrete etc.) With its excellent performance and good performance, Impact Crusher is widely used in highway, hydroelectric, artificial stone and sand, crushing and building material industry ect.

 

Vertical Shaft Impact Crusher

Vertical Shaft Impact Crusher is a kind of mining machinery industry commonly used hard stone crushing equipment, referred to as the counterattack break, impact crusher is suitable for crushing hard material, because of the simple structure, power consumption saving, broken ratio, product size uniform advantages, in metallurgy, coking, chemical, building materials, refractory materials and other industrial sectors widely used, such as cement limestone crusher, has a large capacity, a small particle size advantages

Vertical Shaft Impact Crusher technical characteristics :

[1] .Multiple cavity is crushed, suitable for crushing hard rock, high efficiency and energy saving.
[2] .Low and big feed port, convenient production line layout and increase the size of feeding material.
[3] .Full hydraulic open, easy to repair and replacement of wearing parts, product shape of a cube, nesting adjustable particle size, simplified crushing process.
[4] .The unique tooth type counterattack scaleboard, new wear-resistant materials so that the plate hammer, back lining and lining board with longer life.

Vertical Shaft Impact Crusher classification:

Vertical Shaft Impact Crusher according to their structural characteristics can be divided into the single rotor impact crusher ( back broken) and double rotor impact crusher ( back broken). Rotor turning, single rotor impact crusher the reversible rotary and not reversible turn two big types. Double rotor impact crusher can be classified to rotate in the same direction, reverse rotation type and the opposite direction rotation type three types. According to the internal structure, single rotor impact crusher is divided again with even grate plate and without regularity grate plate two forms. Double rotor impact crusher can be divided into the rotor at the same level and the rotor is not at the same level in two forms.

Vertical Shaft Impact Crusher has such advantages as: simple in structure, large crushing ratio, low energy consumption, high output, light weight, cubic final product, and it is usde in mineral processing, chemical, cement, construction, refractory material, ceramics, glass, etc, such industrial sector for midium, fine and medium-hard materials. Eg: limestone, clinker, slag, carbon coke, coal etc. Vertical Shaft Impact Crusher has larger crushing ratio, and can make full use of the high-speed impacting energy of the entire rotor. However, due to the blow bar is easily to wear, so it is restricted in hard materials. So Impact Crusher is mainly usde in coarse, midium, and fine crush, such as, limestone, coal, Calcium Carbide, quartz, dolomite, sulfuration iron ore, gypsum, chemical raw material etc, under midium hard brittle material. the ideal size of Vertical Shaft Impact Crusher is from 100-500mm, the max feed size shouldn't exceed the specified value. Users can adjust the space between the hammer and Impact plate, components of the machine, then get the final product. 
 

Vertical Shaft Impact Crusher is applied to mobile crushing and screening station 

Vertical Shaft Impact Crusher working principle:

Vertical Shaft Impact Crusher use impact energy to crush materials. When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed. When the materials get into the area which the hammers effect, under the impact function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed, then discharged from the discharge port. Users can adjust the space between Impact Rack and Rotor Support, and then get to the expected size.

Vertical Shaft Impact Crusher Features and Benefits:

[1]、Many cavity to crush, suitable for crushing hard rock.
[2]、Low and big feed opening make the production line easy to arrange and increase the size of feeding material.
[3]、New anti-abrasive material which prolong service life of impact hammer, impact plate and liner.
[4]、High-chromium plate hammer, unique Impact plate, especially for hard rock crushing, high efficiency and energy saving.
[5]、Hard stone crushing, high efficiency and energy saving.
[6]、Reasonable design of leveling plate making the finished material finer and cubic-shaped without internal cracks.
[7]、the shape of the products are cube, the discharge opening size can be adjusted.
[8]、Simplify the Crushing process.
[9]、Hydraulic start-up which is convenient for maintenance and replacement of wear-parts.  

Vertical Shaft Impact Crusher Impact crusher technical parameters : 

Model	Specification ( mm )	Feeding size ( mm )	Yield ( t/h )	Power ( kW )	Dimensions ( mm )	Weight ( T )
PF-0807	850×700	400×730	15-30	30-45	2210×1490×2670	8.1
PF-1007	1000×700	400×730	30-50	37-55	2400×1558×2660	9.5
PF-1010	1000×1050	400×1080	50-80	55-75	2400×2250×2620	12.2
PF-1210	1250×1050	400×1080	70-120	110-132	2690×2338×2890	14.9
PF-1214	1250×1400	400×1430	130-180	132-160	2690×2688×2890	18.6
PF-1310	1300×1050	490×1170	80-140	110-160	2780×2478×2855	16.2
PF-1315	1320×1500	860×1520	160-250	180-260	3096×3273×2667	19.3
PF-1415	1450×1500	1145×1520	220-450	220-315	3745×3022×3519	27
PF-1520	1520×2000	830×2050	300-550	315-440	3581×3560×3265	38.7
PF-1818	1800×1800	1600×1850	600-850	650-900	4180×4200×4900	75

PREV:Jaw Crusher
NEXT:Sand Making Machine